background image

Pushbutton sensor 4 Standard / Komfort System 55

9

Accessories

Individually labelled rocker sets are available from the Gira inscription service www.bes-
chriftung.gira.de.

Rocker set, 1-gang for pushbutton sensor 4

Order no. 5751 ..

Rocker set, 1-gang, inscribable, for pushbutton sensor 4

Order no. 5761 ..

Rocker set, 1-gang, inscribable, for pushbutton sensor 4

Order no. 5771 ..

Rocker set, 2-gang for pushbutton sensor 4

Order no. 5752 ..

Rocker set, 2-gang, inscribable, for pushbutton sensor 4

Order no. 5762 ..

Rocker set, 2-gang, inscribable, for pushbutton sensor 4

Order no. 5772 ..

Rocker set, 4-gang for pushbutton sensor 4

Order no. 5753 ..

Rocker set, 4-gang, inscribable, for pushbutton sensor 4

Order no. 5763 ..

Rocker set, 4-gang, inscribable, for pushbutton sensor 4

Order no. 5773 ..

Remote sensor

Order no. 1493 00

10 Warranty

The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your re-
sponsible salesperson (specialist trade/installation company/electrical specialist trade). They will
forward the devices to the Gira Service Center.

Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme

Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald

Postfach 12 20
42461 Radevormwald

Deutschland

Tel +49(0)21 95 - 602-0
Fax +49(0)21 95 - 602-191

www.gira.de
[email protected]

16 / 16

32406202

10868646

29.06.2022

Summary of Contents for 5011 00

















Reviews: