background image

6

Selection of the installation site

The selection of the installation site and good illumination are 
critical for good picture quality.

No backlighting

Do not point the camera toward strong background lighting, 
such as streetlamps or yard illumination. 

Prevent strong sunlight from hitting the lens.

Picture background

Avoid pointing the camera toward extremely light picture back-
grounds and backgrounds with stark contrasts.

Illumination 

LEDs integrated in the camera provide even field of view illumi-
nation in the darkness. 

In poor lighting conditions (< 1 lux) or with the field of view illu-
mination switched on, the colour camera provides black and 
white pictures only.

If the entry area is equipped with additional illumination, ensure 
that the light source does not shine directly into the camera from 
the front. The best installation site of an external light source is 
above the colour camera.

Installation height

The recommended installation height of the colour camera is 
1.50 m.

At this installation height, people with an average height of 1.80 
m are presented optimally.

The minimum installation height is 1.20 m.

i

Black and white mode in poor lighting conditions

Summary of Contents for 1269 65

















Reviews: