Gira 1111 00 Operating Instructions Manual Download Page 3

4 Operation 

Channel assignment of the wall transmitter 

Figure 3: Channel assignment 

Sending radio telegrams 

Press channel button, e.g. 

1+

, to transmit a radio telegram. 

The corresponding LED lights up as an acknowledgement. 

As long as no light scene functions were selected, the following responses occur, depending on 
the type of receiver: 

Button 

Length 

Lighting 

Venetian blind 

X+ 

less than 1 second 

Switch on 

Slat
adjustment 

X- 

less than 1 second 

Switch off 

Slat
adjustment 

X+ 

longer than 1 second 

brighter 

Blind moves up  

X- 

longer than 1 second 

darker 

Blind moves down  

The maximum transmitting length is 12 seconds, even if another button is pressed after 
that. 

If more than one button is pressed at the same time, the radio telegram of only one button 
is transmitted. 

Calling up light scenes 

Light scene button has been taught (see Commissioning). 

Press the light scene button for shorter than 3 seconds. 
Receivers switch to the stored light scene value. 

Save light scene 

Light scene button has been taught (see Commissioning). 

Set the required lighting situation. 

Press the light scene button for longer than 3 seconds. 
First the old light scene is called up; do not release the button during this. After about 
3 seconds the new light scene is saved and activated. 

32532712 

10499114  I00 

28.09.2011 

3/9 

Radio bus system  

Radio wall transmitter, flat design 

Summary of Contents for 1111 00










Reviews: