Wind sensor Standard
Order No. : 0913 00
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Not suitable for controlling 24 V Venetian blind inserts. If there
is a fault, 230 V might enter the 24 V network.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
1/6
82523842
07.08.2014
Wind sensor Standard
Blind control system
