Blind controller insert DC 24 V
Order-No. : 0388 00
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
To supply the insert and to control the extension inputs it is necessary to use a power
supply unit that provides DC 24 V SELV. This ensures reliable isolation between the
primary and secondary sides.
Risk of injury. Use the device only for controlling Venetian blind and roller shutter
motors or awnings. Do not use it to switch other loads.
Use only Venetian blind drives with mechanical or electronic limit switches. Check the
limit switches for correct adjustment. Observe the specifications of the motor
manufacturers. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) 24 V insert
(2) Frame
(3) Shutter cover
(4) Terminals
(5) Space for sensor terminal block
3 Function
Intended use
-
Control of electrically-driven Venetian blinds, shutters and awnings that are operated with
DC 24 V SELV
-
Operation with suitable shutter cover
-
Installation in appliance box to DIN 49073
1/8
32545312
17.05.2011
Blind controller insert DC 24 V
10499098 I00
Blind control system
