3 Function
Intended use
-
Automatic switching of lighting depending on the heat motion and ambient brightness.
-
Surface-mounting in indoor and outdoor areas
Product characteristics
-
Variable installation position
-
Protected against spray water
-
Follow-up time, sensitivity and brightness value settable
-
Test operation for checking the detection area
-
Sensor head adjustable in 3 axes
-
Screens for limiting the detection area
-
18 detection zones in 3 levels
-
Parallel connection of multiple controllers possible
-
Manual switch-on possible with installation button
Automatic operation
The controller detects heat motions of people, animals and objects.
-
The light is switched on if a person enters the monitored detection area and the brightness
is below the set threshold.
-
The light is switched off if no more movement is detected in the detection area and the
follow-up time has elapsed.
In order to avoid light oscillations due to the cooling of a bulb, the controller does not evaluate
any signals for approx. 2 seconds after switch-off.
4 Operation
Switching the light on manually
Optional push-button is installed.
o
Press push-button briefly.
Light is switched on independently of the brightness for the set follow-up time.
When motions are detected, the follow-up time is restarted.
Configuring the controller
The controller has one adjuster each for the brightness threshold, the follow-up time and the
operating mode.
2: Adjuster
82508412
19.05.2011
2/10
Observer 110
