7
On the back of the radio weather station:
1. Insert button cells (2 x CR 2032 3 V) or connect the optional
power adapter (see Page 13).
Note the polarity shown.
2. Select the temperature unit with the
°C/°F button
.
3. Specify the unit for the air pressure display with the
mb/hPa /
inHg
button
.
mb/hPa = millibar/hectopascal
inHg = inches of mercury column
4. Push the
Reset button
with a pointed object.
✓
The radio weather station searches for radio sensors. The search
is ended automatically after 5 minutes.
If during the search a channel in the temperature/humidity range
is switched to, the search is indicated by the flashing of the fol-
lowing symbols:
5. Set time and date format if necessary (see Page 21)
6. Adjust inside temperature display if necessary (see Page 18).
i
Searching for radio sensors
The search for radio sensors can be restarted
(e.g. after changing the batteries), by switching to the temperature/
humidity area with
Mode
and then pressing and holding
Memo
and
Ch
for 2 seconds.
i
Assigning several radio weather stations
to a radio sensor
Up to five radio weather stations can be assigned to a radio sensor.
For this, the
Reset button
must be pressed at each radio weather
station during commissioning.
Summary of Contents for 0334 Series
Page 1: ...Operating instructions Radio weather station 0334...
Page 27: ...27...
