User’s manual
Giotto
espresso coffee machine
__________________________
Subject to change without notice Page 6 of 25
Instruction for use
This machine has been designed for the sole purpose of producing coffee, hot water and
steam for hot beverages.
All other uses are outside of the scope of this machine and, therefore, dangerous and
hazardous.
The machine has been designed from safe, accessible, durable components and
materials and manufactured to the highest standards for use only in home / domestic
environment.
The machine should not be exposed to elements such as sunlight, rain, snow, extreme
temperatures etc.
The machine must be operated by responsible adult persons who know the use of the
equipment and should not be used by children, minors or untrained persons.
To protect against electric shock do not immerse machine, cord and plugs in water or
other liquid and do never let machine’s internal parts get in touch with liquids.
The user should be fully conversant with safety operating procedures contained in the
manual and should follow the instructions and advice provided with.
To ensure maximum performance efficiency, it is essential that technical service and
maintenance is carried out exclusively by ECM authorised technicians.
It is the responsibility of the user to notify the manufacturer of any defects or damages
which may affect the safety of the original installation or future safe operation of the
machine.
The user must respect the safety regulations at the point of installation.
The user must check the surrounding area to ensure safe and hygienic use are
guaranteed.
The machine component’s manufacturers are responsible for the parts supplied by them.
The customer is responsible for the personal use of the equipment.
It is the responsibility of the user ensure that the location of the machine is hygienic,
and that its continued safe operation can be guaranteed.
When the machine is not being used for long periods of time, the hydraulic systems
should be drained completely and the machine stored in a temperature above freezing
(0°C or 32°F).
This will prevent the hydraulic system from freezing which could damage internal pipes
and boiler.
All spare parts fitted to the machine must be original ECM components.