EN
3
Thank you for purchasing the HC4 Amplified Stereo Headset from Gioteck.
Please read this booklet thoroughly before using the product.
For help with the set-up or operation of this product, please contact
our customer support team :
gioteck.com/contact-support
To use this headset as a wired, powered device press the Power button
to turn the headset on. Volume will automatically be increased.
Controls on the ear cups will function as shown on Page 1.
This headset will also operate as a wired, non-powered device. This means your
headset will operate without charge. In this mode you do not need to turn power
on at the earcups, simply plug the headset straight into your device. Functionality
of the controls on the earcups will be disabled and volume will be limited.
CHARGING
It is recommended to fully charge the headset before first use.
Do not use the
headset whilst the charging cable is still plugged in, as electrical interference
will occur
.
Connect the USB cable between the headset and your Console,
PC or MAC. The LED on the headset will turn ORANGE while
charging and be OFF when fully charged. The headset will take
approximately 4 hours to fully recharge from a drained state.
A low battery (20 minutes remaining) will be indicated
by the headset LED flashing continuously.
SOUND SETTINGS: PS4
The PS4 allows you to select which sound outputs via the controller:
Settings > Devices > Audio Devices and set the headset to ‘All Audio’,
adjust the volume on the headset and set the sensitivity of the microphone.
Test the microphone’s function and click on OK before leaving. Do not
enter a game before setting the microphone and game sounds.
SOUND SETTINGS: XBOX ONE
The Xbox One Microsoft Stereo Headset adapter will output Game & Audio
Sound simultaneously. To change the balance between chat and game sound,
please refer to the Microsoft® Stereo Headset Adapter instructions.
SOUND SETTINGS: PC/MAC
To use this headset with a PC or Mac , it will need to have a
combined input/output socket (combined headphones in and out).
Alternatively, you can use an adaptor cable (female 3.5mm socket
to 2 x 3.5mm male jacks) which you can purchase separately.