16
17
OperatOr, safety, and general maintenance manual:
giO electric bicycles, scOOter type e-bikes and 3 wheeler
Chapter 13:
Troubleshooting
problem
condition
solution
Turn vehichle on and
nothing happens. No
any light indications on
the display
A.
Check the main
breaker of the handle
bar and check if it is on
“ON” position
A.
flip dhe breaker
lever on “ON”
b.
fasten connections
b.
Check power connector
and battery level
motor dosen’t
rotate but the power
indication light is on
A.
Check the battery
and motor connections
A.
Clearn and fasten
battery terminal
connectors
b.
fastern the motor
connections with the
controller under the seat
Power indicator light is
on and the breake light
is on
A.
Check the breake
levels if they return to
normal position
A.
loosen the breake,
if there is any corrosion
replace, change a new
one.
b.
Battery voltage is
below 42 volts
b.
Change or replace the
battery
The throttle does not
work or switch on, the
vehichle moves without
acceleration
A.
Check the grip for
damage
A.
use the flat head
screwdriver to adjust
the gap between the
rubber handle and the
cover
b.
Check the throttle
spring
c.
Check the throttle
spring
b.
Check throttle
connections
The range
is low
A.
Charger
light is off
A.
Bad connection
between the charger
and the battery
A.
Check the charger
plusg position
b.
Charger dosen’t
charge
b.
replace the charger
b.
Battery
dosen’t
hold the
charger
A.
Connections
between the battery
are not good
A.
Check all
connections between
the batteries.
b.
replace the bad
battery cell
b.
Bad battery cell
