HOW TO OPERATE
7
Facebook.com/GinnysBrand
USING THE KETTLE
Before first use, follow the directions below to bring fresh water to a boil.
Pour out the hot water and thoroughly rinse the kettle. It is now ready for
use.
1. Make sure the kettle is OFF and unplugged from the electrical outlet.
2. Remove the kettle from the power base.
3. Press the lid release button to open the lid and fill the kettle with the
desired amount of fresh water (between MIN and MAX on gauge).
4. Close the lid and place the kettle on the power base.
5. Plug the power base into an electrical outlet and push down the power
switch. The light will come on to indicate the kettle is heating.
6. When the water comes to a boil, the kettle will automatically switch OFF.
7. Use care when pouring hot water.
1. Turn off and unplug the kettle.
2. Always allow the appliance to cool completely before cleaning.
3. Lift the filter out of the kettle. Wash it with clean water and replace.
4. DO NOT use abrasive brushes or pads, or harsh cleaning solutions.
5. Wipe the exterior of the kettle with a damp cloth, as needed.
6. Over time, hard water may cause calcium deposits in the kettle. To clean
these deposits from the the kettle:
A. Fill the kettle with 1 part white vinegar and 2 parts water to cover
deposits. Let the vinegar solution sit for at least 1 hour.
B. Empty the solution from the kettle. Wipe off any remaining
deposits with a damp cloth.
C. Fill the kettle with clean water, bring to boil and then discard the
water.
D. Repeat this process as needed.
7. DO NOT immerse any cord, plug or electrical appliance into water.
8. Ensure all parts are dried thoroughly before reassembling and using
this appliance.
CLEANING & CARE
