background image

Under temperature Control model 

At  temperature  control  status,  fast  press  2  times  to 
switch  between  degrees  Celsius  and  degrees 
Fahrenheit. 

1.

 

When  power  on,  OLED  screen  show  null 
resistance,  0.0W  Wattage  and  memory  degrees 
Celsius or degrees Fahrenheit. When user vaping, 
the  screen  will  show  real-time  wattage,  real-time 
resistance, power and setting temperature. 

2.

 

Reference  resistance  Setting:  Initial  setting:  make 
sure  the  atomizer  is  normal  temperature,  press 
"+"  and  "-"  button  at  the  same  time,  the  screen 
shows  "set  resistance  x.xx

"  which  means  the 

resistance has been set successfully. 
Intelligent  reader:  make  sure  the  atomizer  is  in 
normal temperature, in the mean time, the battery 
power  button  once  working  without  atomizer 
connected.  Connecting  with  atomizer,  power  on, 
the system will show "new coil+" and "same coil", 
press "-" indicates the same one, then enter into 
the  working  status,  press  "+"  indicates  another 
one,  the  screen  shows  "Set  resistance  x.xx

which  means  the  resistance  has  been  set 
successfully. 

3.

 

Press  "+"  or  "-"  button  to  adjust  temperature. 
Degrees Celsius change from 100°C to 300°C, per 
press  add  or  reduce  1°C,  long  press  can  change 
faster.  Degrees  Fahrenheit  change  from  200°F  to 
600°F, per press add or reduce 1°F, long press can 
change faster. 

4.

 

When  time  of  taking  one  puff  is  longer  than  3 
seconds,  if  the  connected  atomizer  is  not 
temperature  control  tank,  the  system  will  switch 
to  Wattage  Model  and  when  puff  time  is  longer 
than 8 seconds, the atomizer will stop working. If 
the  connected  atomizer  is  temperature  control 
tank, when puff time is longer than 8 seconds, the 
system will stop working and the screen will show 
0.00V  voltage,  current  resistance  and  setting 
wattage. 

 

Summary of Contents for LITE 65 DG KIT








Reviews: