Year/ Date/Time Setting
Press SET for 3 seconds to access the settings mode.
When YEAR is flashing press UP or DOWN to change the YEAR, then press SET to go to DATE setting
When MONTH is flashing press UP or DOWN to change the MONTH, then press SET to go to DAY setting
When DAY is flashing, press UP or DOWN to change the DAY, then press SET to go to TIME setting
When HOUR is flashing, press UP or Down to change the HOUR; then press SET to go to MINUTE setting.,
When MINUTE is flashing, press UP or DOWN to change the MINUTE; then press SET to go to Time Format Setting,
When “24H/12H” time format is showing, press UP or DOWN to change the time format; then press SET, it will go back to normal
display.
Temperature Format Setting
Press UP to change the temperature format between
0
C/
0
F in normal time display mode
Alarm Setting
(This clock can be set with3 alarm settings; and alarms can be set with “normal alarm mode” or “week days alarm mode”)
7 AL
7 days alarm mode: the alarm will go off 7 days a week
5 AL
5 days alarm mode: the alarm will go off in week day only
Press the DOWN button to access the alarm setting and the clock will initially be on showing “7 AL” , press UP and DOWN to
choose the alarm mode you want to set, and press SET to confirm and it will bring you to the first alarm setting page.
the first alarm is initially turned off with display '--:A1' (to turn alarm ON press UP button to show '00:00') To turn OFF press
DOWN button.
To set the first alarm, press SET when it’s display “0:00”, the hour will flash and then press UP and DOWN buttons to adjust the
hour; press SET again, the minute will flash and press UP and DOWN to adjust minute.
After adjusting time, press SET again. It will go to the second alarm time, initial mode will be ‘--:A2’ (to turn alarm ON press UP
button to show '00:00') To turn off press DOWN button. Follow the same instructions as above to set the time.
After pressing SET, it will go to the third alarm showing initial mode '--:A3' (to turn alarm ON press UP button to show '00:00').
To turn OFF, press DOWN button. Follow the instructions as above. After finishing setting the three alarm settings, press SET it
will go back to normal display.
Sound Activation Function & Time Display Only Setting
The sound sensitive function can be turned off so the time can display continuously without going off. But Having this function
turned ON will save energy. The clock can also be set to display time only, without alternating between date and temperature.
To turn sound activation function ON, press the 'V/S' button. When clock displays 'on:Sd' , the sound activation function is ON.
Press the V/S button again for the clock to display '--:Sd', means this function is turned OFF.
Press and hold the V/S button for 3 seconds until hearing a “Beep” Sound, the Clock will display Time only. To turn back to a
display of time, date and temperature, press and hold the V/S button until hearing an “Beep” sound.
