Gin Gliders Gingo Airlite L, Manual

Page: 19 / 36

19
Attaching the rescue deployment bag to the harness deployment handle
Handle attachment Pass the handle through the center
loop Pass the handle through itself Pull to make a clean, tight knot
2 4 1 3
The rescue container for this harness comes with its own deployment handle. This handle and
its strap must be connected to the deployment bag of the parachute. In particular, check the length
of the strap connecting the rescue deployment handle to the rescue inner container. It should
be long enough that the reserve can be extracted without the danger of the pins not being pulled
before the strap tightens on the reserve, but not so long that there is excessive slack that extends
the movement required for deployment.
The deployment bag of other manufacturers’ rescue systems (i.e. non-GIN rescue systems)
may have different loop positions which may cause a deployment failure. Be sure to contact
your parachute dealer or a qualified professional to check the connection, position and secure
deployment, and refer to the rescue manual for details.