11
INSTRUCTION FOR USE
•
Connect the short silicon tube
1
, with antibacterial filter
2
, to the suction connector
3
.
The other tube, with one end connected to the filter must be connected with the other end to the
jar's lid connector
4
where has been fixed the red float. When the 90% of the volume of the jar is
reached there is the activation of the security float(the float close the aspiration connector on the
jar) to avoid liquid penetration inside the device. The device must be used on a plan of horizontal
operation.
•
Connect the long silicon tube
5
to the other jar's lid connector
6
•
Connect the other end of the long silicon tube
5
to the probe plastic connector
7
then connect
the suction probe
8
to it.
•
Unscrew the jar's lid and fill the jar 1/3 full or ordinary water (this for an easy cleaning operations
and an rapid reaching of the functionality vacuum) the rescrew the lid on the jar correctly.
•
Push
foot
9
to start suction.
•
To extract the accessories and start with cleaning as write in the clean chapter
