Gima PRIMALED SO, Operator'S Manual

Page: 4 / 32

Operator
’
s Manual
MO080-IT 12/09/2017
Rev.3 Page 4 of 20
Hollow-core concrete : In this case, the floor slab must be sandwich closed by means of the plate and counter-plate.
The plate and counter-plate shall be jointed with M8 steel threaded bars, and clamped on the front and back ends with
washers, nuts and lock nuts.
The Product is an EM electro-medical device and therefore falls within the field of application of the EN 62353
standard. Consequently, any operation performed on the Product must be carried out in compliance with the EN 62353
standard, where applicable.
1.1 Operator qualification
This paragraph describes the requirements and qualifications which the operators involved in the various stages of
Product life and use must possess.
Installation Installer and/or qualified technician
Use Professional medical personnel
Routine maintenance Qualified technician with required technical-professional skills
Special maintenance GIMA or authorized Dealer
Assistance GIMA or authorized Dealer
Cleaning Properly trained medical and paramedical personnel
Demolition
Comply with applicable laws on waste disposal. This product must not be disposed of in
standard waste disposal bins. To avoid risks for the environment and health deriving from
the dispersion of polluting substances in the environment, separate the various internal
component parts such as iron, aluminium, plastic and electrical material, and dispose of
these through authorized channels so as to ensure correct recycling.
1.2 Packaging, transport, storage and characteristics of installation premises
Boxes containing the Product together with operator’s manual
Transport is made by GIMA or any road-hauler as long as in compliance with the following characteristics: Temperature
(°C): -15 / +60; Humidity: 10 / 75 %; Atmospheric pressure (hPa): 500 / 1060.
The packaged Product must be stored (warehoused) in dry premises having the following characteristics:
Temperature (°C): -15 / +60; Humidity: 10 / 75 %; Atmospheric pressure (hPa): 500 / 1060.
The premises where the Product is started up must have the following characteristics:
Temperature (°C): +10 / +40; Humidity: 30 / 75 %; Atmospheric pressure (hPa): 700 /
1060.
1.3 Graphic symbols used on the Product and on packaging
Description of the symbols on plates, product and in manual:
Graphic symbol showing product bears
CE marking RECYCLING! The Product must be
recycled separately
Symbol indicating date of manufacture
(month/year)
Model
Manual reading obligation Serial number
Manufacturer’s address
Top side of packaging
Humidity to be complied with (indicate
max limit at top right and min limit at
bottom left)
Fragile packaging
Limit temperature (indicate max limit at
top right and min limit at bottom left)
Pressure to be complied with (indicate
max limit at top right and min limit at
bottom left)