29
ENGLISH
Operation Instructions:
DATE: Date setting
1. When cursor stays on the Month of the date, press “
” (Mode/OK) key
to active Month option, the cursor flashes on the Month of the date;
2. Press
/
(Navigation key) to adjust month.
3. Press “
” (Power/back) key or “
” (Mode/OK) key to confirm and
exit from date setting.
4. The procedures of adjusting Day value and year value are the same with
Month adjustment.
Date Format: MM. dd, yy.
Note: The setting operations of other parameters (such as
TIME, CONTRAST, ALARM SOUND etc.) are the same with
date setting.
TIME: Time setting
CONTRAST: LCD contrast setting
ALARM SOUND: The factory default value is “ON”. When the set is “ON”, the
device stays in alarm status and the alarm icon displays on the upper right
display screen.
ALARM SpO2: SpO2 alarm setting; the factory default value: 90%.
ALARM PR HI/LO: Pulse rate: High/Low limit setting; the factory default
value: High limit: 120, Low limit: 50.
PULSE SOUND: Pulse beep sound switch.
REC INTERVAL: Record interval setting; five options: “1s, 2s, 4s, 8s” and
“OFF”; When the option is “OFF”, the device will not record real-time
measurement data.
Note: The length of data record is limited to 30 seconds at least,
and the maximal length for one record is also limited to one hour
(for one second interval) , 2hours(for 2 seconds interval) 4 hours
(for 4 seconds interval) or 8 hours (for 8 seconds interval).
