16
Operating conditions
Checks to be carried out
Lack of power supply
Check that the supply plug is correctly
connected to the wall outlet.
Make sure that the system supply voltage is suitable for
the device.
Check the fuse.
The device is switched on
but not running
Disconnect the plug and re-connect it to the power
socket.
Excessive noise during
operation
Make sure that the device is placed horizontally.
Remove any materials leaning on the device.
Check for any foreign objects or excess dust
inside the device.
The air does not come out
from the hose
Make sure that the hose is not bent.
Make sure that the connector is
properly inserted.
It remains blocked on
a single phase for 20
seconds while inflating
Make sure that the leg/arm cuff is not punctured and that
there are no air losses.
In this case the pressure sensor detects the air
loss in the leg/arm cuff section and after 20
seconds it automatically passes to the next
phase.
7
Troubleshooting
