Gima 32786, User Manual

Page: 16 / 72

16
TROUBLESHOOTING
Note: If your problem cannot be solved by the above, consult your store of pur-
chase. Do not disassemble the unit.
STORAGE & MAINTENANCE
- Keep away the unit from direct sunlight, extreme temperatures, humidity or mois-
ture.
- Use a dry, soft cloth to clean the unit, or if desired, use a cloth lightly dampened
with water.
- Do not use alcohol, benzene, thinner or other volatile liquids to clean the unit.
- Do not wash or expose the wrist cuff to liquid.
- Remove batteries from the unit when it will not be used for more than 3 months.
Problem Cause Solution
No display when you
press the Power /
Start button.
Have the batteries run
out?
Replace new batteries.
Are the battery polarities
wrong?
Re-align batteries in correct
polarities.
“Er P” displayed Fail to inflate.
Check if the cuff is properly
connected. Replace the air
tube if it is broken.
“Er 1” displayed Deflate too rapidly. Return for servicing.
“Er 2” displayed
Movement during
measurement.
Do not move during
measurement.
Signal interference.
Remove interfering source
e.g. mobile phones,
magnets.
“Err 3” displayed Incorrect results. Measure again.
ENGLISH