![background image](http://html1.mh-extra.com/html/gima/28544/28544_quick-start-manual_2227907003.webp)
5
ENGLISH
Maintenance
Cushion
1. Use germicidal soap to wash the cushion.
2. Use wash cloth to wipe the cushion dry in the air. Do
not use detergents or other solvents.
3. Do not machine wash or tumble dry.
4. Do not heat or steam autoclave.
Cover
1. Wash at 30°C do not iron.
2. For hygiene reasons, each cushion should be used
on one user only.
3. We suggest you to purchase another cover for re-
placement when you wash the first one, to avoid di-
rect contact between user and cushion.
If you need assistance in setting up, using or main-
taining the product, contact the manufacturer.
Trouble shooting
1. Make sure the cushion and all four corners are inflat-
ed completely.
2. Immerse the over-inflate cushion in water to locate
the leak.
3. When the leak has been found out, mark the leak by
inserting a toothpick into the hole.
4. Take out air cushion and deflate the air inside.
5. Allow the cushion to dry completely, then take away
the toothpick.
6. Clean the area around the hole and let surface dry.
7. Place a patch film over the hole.
8. Press the patch film down firmly to have a good seal.
Do not use cushion within 30 minutes.
9. When reuse cushion, adjust the cushion to proper in-
flation following the user manual.
Patches do not change the performance of the cushion,
but if your patch is not successful in solving the prob-
lem, or if there is more serius damage, please contact
your local dealer.
Expected service life:
1 year.
Symbols
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
3. Turn valve clockwise to
close and remove hand
pump (for two valves,
repeat step 1-3).
4. With cushion in this
over-inflated
condi-
tion, place the user on
the cushion in his/her
normal sitting position
with arm and foot rests
properly placed.
5. Place your hand be-
tween cushion and the
user’s deepest pen-
etrating bony promi-
nence.
6. With your hand in
place, slowly turn valve
counter-clockwise to
release some air to im-
merse the user in the
cushion.
Caution: read instructions (warnings) carefully
Keep in a cool, dry place
Manufacturer
Product code
Medical Device compliant with Regulation
(EU) 2017/745
Keep away from sunlight
Consult instructions for use
Lot number
Medical Device
Temperature limit
Humidity limit
Atmospheric pressure limit
Date of manufacture