M
A
IN
T
E
N
AN
CE
8
MAINTENANCE
|
TRACKMAN® CONNECTED
Chapter 3
MAINTENANCE
Battery
Environment sensor
The environment sensor battery can be changed by removing the two small PHILIPS 00
screws and removing the back battery cover.
The device takes a coin cell CR2032. It should be inserted so that the + side is facing
outwards. For more details, refer to the environment sensor user manual available
here.
The back battery cover may have small padding elements on the inside of it. If this is
the case, ensure the padding elements remain in place when putting the battery
cover back on.
You will know when the battery is properly inserted since it will blink three times and
then once every time the button is pushed. If the environment sensor blinks three
times every time the button is pushed, this is an indication the battery is not making a
good connection and will need to be reseated.
SAMSUNG Galaxy Tab S3
When your tablet runs out of battery, simply charge it with the power supply.
It is recommended to keep the tablet plugged in while running.
Do not try to open the SAMSUNG Galaxy Tab S3: the battery is not removable from
the device.
Decontamination
Accessories and screen protectors could be cleaned with a soft cloth or lint free tissue
dipped in distilled water, simple soap solution, ethanol, or DNA/RNAse remover.
NOTICE
Do not autoclave any TRACKMAN Connected components.
NOTE
