Page 6 of 7
4. Operational Qualification
During setup of PIPETMAX, the PIPETMAX Alignment Utility must be run. If the alignment
completed successfully, record the initials of the person who ran the PIPETMAX Alignment Utility.
Initials
Alignment Completed Successfully
Run a Protocol
It is recommended to run a protocol without samples before running a protocol with samples to
check system operation.
Ran Protocol
:
with
or without
bed elements
with
or without
fluids
Initial
Protocol Ran Successfully
Record Pipette Head Information
Record the serial number of the pipette head(s) that were used when running the protocol.
Serial Number(s)
Initial
MAX8x20 Pipette Head(s)
MAX8x200 Pipette Head(s)
MAX1000 Pipette Head(s)
MAX4x1200 Pipette Head(s)
