G
e
t S
ta
r
t
e
d w
it
h P
iP
e
t
M
a
N
® M
Part
S Ch
e
C
k
li
S
t
3
2
PIPETMAN® M
|
USER’S GUIDE
PARTS ChECklIST
|
PIPETMAN® M
Parts Checklist
●
PIPETMAN® M pipette
●
Power Supply, 5V with AC adapter and
cable
●
Battery tags (qty 4)
●
Ejector tags (qty 4)
●
Tip ejector extension (P10M model only)
●
PIPETMAN® M Quick Start Guide
●
Safety bag
●
Certificate of Conformity with bar-code
sticker
●
Two year warranty
●
lubricant (except for the P10M and
multichannel models)
Installation
NOTICE
Fully charge the pipette (for
approximately three hours)
before use.
For daily use, please wait the
pipette battery reach at least 50%.
PiPetMaN M uses a lithium-ion
battery. Operation on the battery
is done at user’s risk only.
Use only one of the approved charging
devices:
●
Power supply, included in box
●
Stand adapter, for use with Gilson
CARROUSEl™ Stands, sold separately
(part number F807023)
●
POWER CARROUSEl™ charging
pipette stand, sold separately
(part number FB1001)
NOTE
the battery can take a few
minutes to wake up.
Other References
This Quick Start Guide provides you with basic
information to get started with PIPETMAN M.
Make sure you have read PIPETMAN M
User’s Guide, available at:
Visit
for additional
information.
Get Started with PIPETMAN® M
All menu options (refer to
page 10) for PIPETMAN® M can be
reached with two buttons.
Push Button
Turn the push button left or right to set the
volume. Push to pipette.
Mode Button
Access pipette modes and adjust functions.
NOTE
after three minutes of inactivity,
the pipette display will turn off
and enter sleep mode. Press
the push button to reactivate
the pipette. the last setting and
pipetting mode will appear on
the screen.
Mode
Button
Push
Button
Figure 1
Buttons on the PIPETMAN® M
