GILMAN PC900BTNL User Manual Download Page 4

4

or hot air duct containing combustion fumes from burning gas or

other fuels. Confirm that room ventilation is appropriate with the 

local authorities.

 

The air must not be discharged into a flue that is used for 

exhausting fumes from appliances burning gas or other fuels

 

The hood may stop working during an electrostatic discharge 

(e.g. lightning). This involves no risk of damage. Switch off the 

electricity supply to the hood and reconnect after one minute.

 

This appliance can be used by children aged from 8 years and 

above and persons with reduced physical, sensory or mental 

capabilities or lack of experience and knowledge if they have 

been given supervision or instruction concerning use of the 

appliance in a safe way and understand the hazards involved. 

Children shall not play with the appliance. Cleaning and user 

maintenance shall not be made by children without supervision. 

 

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a 

person responsible for their safety. 

 

Children should be supervised to ensure that they do not play 

with the appliance.

 

Do not install the appliance outdoors in a damp place or in an 

area which may be prone to water leaks such as under or near a

sink unit. In the event of a water leak affecting the appliance, do 

not use and contact customer services to arrange for inspection.

Do not use flammable sprays in close vicinity to the appliance.

 

 

Please dispose of the packing material carefully. There is a 

fire risk if cleaning is not carried out in accordance with the 

instructions. Refer to the Care and Maintenance sections carefully 

for details on how to clean and replace the aluminium and carbon

filters (if fitted). 

 

Refer to the Care and Maintenance section for details on the type 

of lamps that can be used and how to replace them.

 

Do not use a steam cleaner for care and maintenance.

 

The appliance is not intended to be operated by means of an 

Summary of Contents for PC900BTNL

































Reviews: