GILMAN GEMINI PURIFICARE GAP23G, Manual

Page: 5 / 16

5
INSTALLATION FILTER
• Invert the appliance, and rotate the base cover along the direction marked
“OPEN”. (Pic 1)
• Take out the 3-IN-1 HEPA filter from the appliance. (Pic 2)
• Remove the packaging of the 3-IN-1 HEPA filter. (Pic 3)
• Install the 3-IN-1 HEPA filter into the appliance. (Pic 4)
• Then install the base cover, rotate and tighten the base cover along the
direction marked “CLOSE”. (Pic 5)
WARNING
• Please remove the polybag packaging of the 3-IN-1 HEPA filter before using
for the first time.
• Ensure the appliance is unplugged before removing or installing the 3-IN-1
HEPA filter.
FILTER REPLACEMENT
• When the LED light ring keeps flashing in red as filter replacement warning
indicator, the filter should be replaced.
• When you replace a new 3-IN-1 HEPA filter, connect the power supply again,
press and hold the ON/OFF touch button for 5 seconds to disengage the red
warning indicator for replacing the filter
NOTE:
• User use the appliance at the first time, after remove the polybag of the filter
and install it in place. No need to reset the filter.
• For best performance, suggest replacing a new 3-IN-1 filter around 3-6 months.