GILMAN gemini GWC55B, Manual

Page: 9 / 20

Cleaning and maintenance
1. Wipe the matching adapter, Type-C charging line and charging base with a clean rag or paper towel.
Cleaning in water is strictly prohibited.
2. If the ceramic cup is stained for a long time, don't scratch the surface with sharp objects such as
blades, so as to avoid scratches. It can be washed with lemon juice or vinegar and dried.
3. Ceramic cup is light and thin. Do not collide with hard objects to avoid damage. The decorative pattern
of the cup body contains k-gold plating, and the bottom of the cup is covered with metal materials. It is
strictly prohibited to put them into microwave ovens, ovens, dishwashers, etc. Ceramic cup
manufacturing process is complex, difficult, many manual procedures, there are inevitable traces of
manual, please understand..
Toubleshooting
Problem Possible causes
The power connection problem
Ceramic cup is not accurately placed on the pad
Full 8 hours of continuous work at one time
Indicator light is not ON
Failure of adapter or type-c cable
Electronic circuit damage
what to do
Check the power connection properly
Pick up the cup and place it on the center of the pad
After replacing the beverage in the cup, place the
ceramic cup in the center of the base again
Replacement a new adapter/type-c cable
Contact distributors
⑧
Poor contact of Type-C cable Reconnect the Type-C cable after unplugging it
Using the wrong cable Replacement of appropriate qualified cable
Using the wrong adapter Replacement of Qualified QC3.0 Adapter
Indicator light flicker fast
Detection of metal objects during wireless charging
Check whether there are metal objects on the
back of the phone or on the cover of the phone