background image

1.   This appliance is for indoor use only.

2.   This appliance is suitable for 220V voltage.

3.   Please use 13A or above specialized power socket individually. It is prohibited to share 

power jack with other appliances.

4.  Please check the connection between the power socket and plug to make sure they are well 

connected. Please do not use extension cord.

5.   It is prohibited to draw out or plug in the power cord with wet hand to prevent electric shock.

6.   It is prohibited to draw out the power socket by pulling the cable. When the power cord is 

damaged, please stop using it and contact our after-sales service center for assistance.

7.   Please unplug the power cord from the socket after the panel is completely cooled down.

8.   Please put the appliance at a place far from Children’s reach. Children less than 8 years of 

age shall be kept away unless continuously supervised by adult.

9.   Do not use the appliance near flame or wet places.

10. Please put the appliance at the even place and do not move it during usage.

11. Please do not dissemble or restructure the appliance arbitrarily. In case of failure, user shall 

contact our after-sales service center.

12. Our company bears no responsibility for the failures caused by arbitrarily dissembling or 

restructuring the appliance.

13. Do not heat up unopened cans on the appliance, it may cause explosion.

14. It is prohibited to heat the empty pot as it would cause the damage for the pot and the 

appliance. Our company bears no responsibility for the failures caused by heating empty pot.

15. Metallic objects such as knives, forks, spoons and lids should not be placed on the heating 

panel since they can get hot and cause scalding.

16. Please make sure there is enough space around the appliance when using. Please keep the air 

inlet and air vent clear.

17. Keep a distance of the surface of the appliance from an overhead cabinet by 760mm or more.

18. Please do not use the appliance on carpet or tablecloth or any other low-heat resistance 

article.

19. Please do not place inflammable material such as paper, cloth, etc, between the appliance 

and the pots/pans in order to prevent the risk of fire.

20. Never try to extinguish a fire with water, but switch off the appliance and then cover flame 

with a lid or a damp cloth.

21. Do not break the surface of the appliance, if the surface is cracked, switch off immediately 

and unplug the power plug.

22. If the supply cord is damaged, it must be replaced by the qualified person in order to avoid a 

hazard.

23. Do not place the unit near to objects which are affected by magnet, such as Credit card, IC 

card, watches or radio etc…

24. Generation of heat will be made on the surface of the appliance and the cookware when in 

used. Do not touch the surface to avoid of hazard of burning. The surface will still be very 

hot after usage, please wait till it is completely cooled down before unplug the plug and start 

cleaning.

25. The appliance is not allowed to be used by children or mentally handicapped person for 

avoiding danger.

2

3

2

3

Usable and Non-usable Utensils

Installation Instruction

Care & Maintenance

7

8

9

10

6

4

Thank you for purchasing our product. Please read this instruction manual carefully

Summary of Contents for Gemini GVI2800











Reviews: