GILMAN gemini GVC222R, Manual, Page: 9 / 20

9
• Slide the sliding switch to open position, remove the roll brush from the floor
brush housing.
• Remove the hairs or dust around the roll brush, rinse the roll brush with water
gently, let it air-dry completely before reassemble.
• After cleaned, install the rolling brush inside the motorized floor brush. Make sure
the rolling brush is proper seat in position. Slide the sliding switch to lock position.
• Turn the unlock/ lock switch to unlock position and push out the roll brush.
• Remove the hairs or dust around the roll brush, rinse the roll brush with water
gently, let it air-dry completely before reassemble.
• After cleaned, install the rolling brush inside the motorized bed brush. Make sure
the rolling brush is proper seat in position. Turn the unlock/ lock switch to lock
position.
The Motorized floor brush can be possibly blocked by big objects or rape around by
hair or long thread.it need to be clean the rolling brush timely.
Clean the motorized floor brush
Clean the motorized bed brush
NOTE: All accessories must dry thoroughly before installing into the appliance.
Sliding switch
Roll brush
Roll brush
Unlock/lock
switch