GILMAN Gemini GMH2000, Manual

Page: 6 / 16

6
3. Setting timer-power-off
The unit has a function of timer-power-off.
When Power-ON, press the mode button once on the control
panel or TIMER button on the supplied remote control.
After the setting, the digit blinks for 5 seconds and shift from
hour to room temperature.
The timer display is on and setting timer power-off is done.
Set Time indication varies from 1 to 24 hours.
00
OPERATING INSTRUCTIONS
Fault circs
Cannot operate
Bad heating
effect
Safeguard
frequently bending
Cannot heating
Remote controller
batteries without power
Room don’ t have enough
airproof
Forget to press power
switch button
Fault cause
Power cut
Bad electric power socket
Setting temperature too low
Eliminate measure
Check power supply
Change new batteries
Press power switch button
Close door and window
Repair socket
Press rising key
Renew normal power
Renew normal power
Turn off heater
Press power key to select high
power
Voltage too low
Voltage is over high
Room temperature is over high
Select improper power