GILMAN Gemini GAP12, Manual

Page: 7 / 18

7
Remove the filter set
Please make sure the power is cut off before replacing
new filter. Pull and hold the brace on the sides of the
filter set , then pull it slightly to remove it from the unit.
Assemble the filter set
Please make sure the power is cut off before replacing new filter.
Please make sure the Nano Photocatalyst filter is placed downward to the inner housing
slot and the white primany filter face to the base cover during assembly.
Alight the filter to the slot, the side with braces outward, then push the filter set flat to the
inner housing into the unit slightly .
The lifetime of the filter differs based on indoor environment, usage times and usage
location.
Product maintenance
White primary filter layer can often be torn off the magic paste for washing (or wiping),
and then expose it under the sun; for drying, paste back the filter to original position .
It is suggested to clean the primary filter in every half month to clear away the large
pollutant, like hairs . as the above way. Also is suggested to change HEPA filter set after
1500 hours operation or using 6 months in total . Please contant Our after sales center for
filter purchase .
Waring : do not flush by water or soak the HEPA and Nano Photocatalyst filter to be
brace