Gillison Forklift Manual
- OPERATION
22
4. Raise the mast until forks are a safe distance
from the ground.
Always carry loads low to ground to
prevent roll over and overhead obstruc-
tions.
5. Select Forward or Reverse on FNR selector.
In Reverse, make sure back up alarm is
functioning.
Check operation of brakes.
Use throttle pedal to increase engine
speed and forklift speed.
Use horn when going in blind spots.
Always use Warning fl ashers when op-
erating around hazards including roads.
FIG. 30
Turn signals - Use on road right of ways
to indicate direction turning. FIG. 30
Lights FIG. 30 - Never use rear work
lights when operating on highway.
Side Shift
Release
Bin Clamp
Clamp
Left
Right
FIG. 30
Push to turn warning
fl ashers on
Push to activate 4 wheel drive
Push to turn on FRONT
work lights
Push for LEFT turn signal
Push for RIGHT turn signal
6. Operation of Parking Brake FIG. 23
Engaged
Disengaged
FIG. 23
7. Four Wheel Drive Operation
On forklifts equipped with the four-
wheel drive option, the four-wheel drive
is engaged by switching the rocker
switch. FIG. 30
The light will illuminate.
Four-wheel drive can be selected while
traveling straight.
8. Fueling FIG. 31
Shut off engine.
Do NOT smoke while refueling.
Clean debris from around cap to prevent
contamination.
Remove Cap.
Insert nozzle.
Fill.
Replace cap.
FIG. 31
Location of fuel tank
Push to turn on FRONT
and REAR work lights
PREVIOUS
PAGE
NEXT PAGE
LAST PAGE
FIRST PAGE
