Gill THOR 10 HAMMER CAGE, Instructions Manual

Page: 11 / 29

J
K
L
3
1
DETAIL J
7
17 20 19 18 18
DETAIL K
5
8
7
9
9
10
DETAIL L
2
4
15
16
13
12
12
8
14
12
12
16
13
11
9
9
10
5
7
3
12
12
13
6
Insert the top section of the front pole into the bottom section of the front pole.
Bolt the extenstion arm socket onto the top section of the front pole. The
socket should be pointing towards the rear of the cage and angled down.
Bolt the Stop Tube onto the top section of the front poles. It should be on the
side towards the rear of the cage.
Insert the extension arm into the socket.
Install hardware.
PART # DESCRIPTION QTY
1 73231031 Front Pole Upper Weldment 1
2 73231032 Extension Arm Socket Weldment 1
3 73231033 Front Pole Extension Arm Weldment; 106.5" 1
4 73231035 Thor Gate Over Rotate Stop Tube 1
5 PULY00100 PULLEY; 40MM SHEAVE; BALL BEARINGS 5
6 PULY00102 SS Shackle 1
7 CHAN00030 Quick Link 8
8 HDWE07031 3/8"-16 Eyebolt; 5" Shank; with Nut 4
9 M2534 Washer, Flat, 3/8" SAE, .875" OD, .4" ID 8
10 HDWE040020E0 3/8"-16 Lock Washer 4
11 HDWE07032 1/2"-13 Eyebolt; 8" Shank; with Nut 1
12 M2543 1/2" Flat Washer; SS 22
13 HDWE04024 1/2" Lock Washer; 18-8 SS 11
14 HDWE01309 1/2"-13 x 3.5" Hex Bolt; 18-8 SS 2
15 HDWE01307 1/2"-13 x 7" hex Bolt; 18-8 SS 6
16 HDWE03108 1/2"-13 Hex Nut; 316 SS 10
17 HDWE01306 5/8"-11 x 8" Hex Bolt; 18-8 SS 1
18 HDWE05028 5/8" Flat Washer; 18-8 SS 6
19 HDWE04010 5/8" Lock Washer; 18-8 SS 3
20 HDWE03107 5/8"-11 Thin Hex Nut 3
www.gillathletics.com
Copyright

2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/12/2019
INST732310
Page 11 of 29
732310 - THOR 10 HAMMER CAGE
INSTRUCTIONS
FRONT POLE ASSEMBLY