www.gillathletics.com
800-637-3090
412
–
S2 STARTING BLOCK
CUSTOMER INSTRUCTIONS
Copyright © 2020 by Gill Athletics. All rights reserved.
GILL ATH
08/20/2021
INST412
The 412 S2 Starting Block consists
of the following:
1x Rail
1x Front Stake Plate
1x Rear Stake Plate
1x Right Pedal
1x Left Pedal
4x Stake Plate Screw
12x Pyramid Spikes
½”
1x Allen Wrench
1x Spike Wrench
Using the four screws and
provided Allen wrench,
fasten the front and rear
stake plates to the rail.
The front stake plate should
be at the end of the
rail with the “10” marking.
The rear stake plate
should be at the end of the
rail with the “55”.
Turn the starting block back over
and place the pedals on the rail so
that they engage the “teeth” of
the rail. The pedals should face
the front of the rail, towards the
“10” marking. Adjust the angle of
the pedals as needed.