8
INSTRUCTIONS FOR USE
Night vision mode
When the built-in photo sensor detects a low level of ambient light, the screen on
the monitor unit will display in black and white. The icon will be displayed on the
screen.
Talk mode
Press and hold the on the monitor unit to talk to your baby through the camera
unit's loudspeaker. An icon will be displayed at the bo om right corner of the
screen.
Digital Zoom
Step1. Press & hold the Menu/Exit key around 2 seconds to enter Zoom mode.
Step2. At the Zoom mode, press the Pan/Tilt key to adjust the direc on of the
camera/image.
Step3. Press LEFT key to pan le ; Press RIGHT key to pan right; Press UP key
to lt up; Press DOWN key to lt down.
Step4. Press and hold the Menu/Exit key again around 2 seconds to operate Zoom
out. During digital zoom mode, the zoom icon will be displayed on the top of
screen.
Warm reminder: If you want to adjust the Volume/Brightness, you have to exit the
Pan/Tilt (press Pan/Tilt key) mode before you operate it.
Scan and switch the cameras
Short press
OK
key to view/scan camera, during the scan mode, the icon will be
displayed on the top of the screen. Each camera's video will be stay on the LCD
around 10 seconds then change to the next camera. Short press the scan key again
to switch the camera under the scan mode. This func on is only available when
two or more cameras are paired.
MENU OPERATION
Pairing the camera and monitor
Step1. Press Menu/Exit key and the menu will pop up.
Step2. Select the camera icon and press
OK
key to enter into sub-menu.
Press the LEFT key or RIGHT key to select the camera to be paired.
Step3. Press
OK
key to start the paring, while the screen shows paring then press
the PAIR bu on on the back of camera(baby unit).
Step4. Once paired, then the screen will display the image from the camera.
Step5. If unsuccessful, please repeat above steps.
EN
