8
When you select the delete item, press the ok key to pop up the
two sub-op ons as shown in the following figure
Select by up and down key. Press the ok key to confirm (delete
item means to delete the camera that has been paired
successfully).
it means the dele on is successful when the icon * on the
upper of the camera disappears.
when the added item is selected to press the ok key. The two
sub-op ons are shown as follows figure.
Use the up and down key to select, press the ok key to confirm,
at this me the power indicator flashes. At the same me, press
Pair code key in TX camera, the power indicator of the TX
camera is also flashing when Pairing , a few seconds later
matched successfully. When the pairing succeeds, the
following figure
When the pairing is successful, the icon * appears the upper of the camera, A er
successful pairing the camera can be used, When the camera is out of range, it will
lose contact. Entering the range again will automa cally connect
Note:
the camera has been matched at the factory, and there is no need to re-
pairing unless they are out of touch.
2.5.6. Voice control se ng
Enter the voice control se ngs as shown in the following figure
Select the voice control se ng, press up and down key to
select, pressing ok key will appear off, low, medium and high,
four sub-op ons , then press up and down key to select , then
press OK key to confirm. The default is OFF.
Note:
when one of the three items of low, medium, and high is selected, there is a
corresponding icon appear at the top of the screen in the monitoring screen that
shows the following figure)
Focus note:
about voice control sensi vity, in the viewing movie state, when the
environmental sound of the TX camera is low to a certain value, the RX machine will
turn off the screen and sound, when the environmental sound of the TX camera is
high to at a certain value, the RX machine will be awakened.
Summary of Contents for Bebe Stars 9501
Page 20: ......
