10
FUCTION /
ΛΕΙΤΟΥΡΓΙΑ
EN
SAFETY HARNESS (
7
)
CAUTION:
Using a safety harness with leg separator is essential to ensure
your child's safety.
CAUTION:
The tray alone being attached to the seat does not guarantee
that your child is secured. Always use the safety harness!
The highchair is equipped with a 5-point safety harness.
Unclipping the buckle: Press the button(a) and pull out the component (b)
Clip the buckle: Insert the components (b) into the buckle (a) you will hear
a click when they are attached correctly.
Adjust the harness depending on the size of the child,using the adjusters(c)
Adjust the position of the straps, or chest belts, depending on the height
of the child. The straps must be adjusted in the slots close to the child's
shoulders.
To adjust the straps or to remove the safety harness, rotate the plastic
locking ring of the safety harness “straps” and “lap belt” on
the rear side of the backrest (d), and remove the harness by pulling it from
the inner side of the seat, though the slots in the seat shell and padding.
To refit the straps, insert the plastic ring, fixed to the end of the strap,
through the slots in the fabric and the corresponding slots in the seat shell.
Rotate the ring into the vertical position, on the
outer side of the backrest(e).
Make sure that it is correctly mounted and locked. When pulling the strap
from the inner side of the seat, the belts should not disengage.
Always make sure that the straps are positioned in the backrest slots
located at the same height.
IMPORTANT:
The harness must only be used with all the components
attached.
IMPORTANT:
Adjust the harness correctly each time when the highchair is
used.