Gilera Runner 125VX Manual Download Page 23

Page: 23 / 90

Checks

Before using the vehicle, check:

. There is enough fuel in the fuel tank.

. The correct fluid level for front and rear brakes.

. That tyres are properly inflated.

. The correct functioning of tail lights, headlamp, turn indicators, stop light and license

plate light.

. The correct functioning of front and rear brakes.

. The oil level in the gearcase.

. The engine oil level.

. The coolant level.

02_01

Refuelling (02_01, 02_02)

Fill the fuel tank with unleaded petrol "

" with an octane number higher than 95. When

the fuel reaches the reserve level, the warning light "

" fitted on the instrument panel

lights up.

CAUTION

SHUT OFF THE ENGINE BEFORE REFUELLING WITH PETROL. PETROL IS
HIGHLY FLAMMABLE. DO NOT LET PETROL SPILL FROM THE TANK OR WHILE
REFUELLING

CAUTION

DO NOT BRING NAKED FLAMES OR CIGARETTES NEAR THE MOUTH OF THE
FUEL TANK: FIRE HAZARD. ALSO AVOID INHALING HARMFUL VAPOURS.

2 Use

Summary of Contents for Runner 125VX



























































































Search results

Summary of Contents for Runner 125VX

Reviews:

Related manuals for Runner 125VX

Brands by name

Popular brands

Gilera Runner 125VX, Manual

Search results

Summary of Contents for Runner 125VX

Reviews:

Related manuals for Runner 125VX

Brands by name

Popular brands