01_13
Light on/of switch (01_13)
The lights switch
«C»
has two positions:
- Down, low-beam light
- Up, high-beam light
To make this control work, the engine must be started.
01_14
Start-up button (01_14)
The kick start pedal
«1»
is placed on the right side of the engine. To start the engine,
just push the pedal backwards with your foot.
CAUTION
CHECK THE GEAR IS IN THE NEUTRAL POSITION BEFORE STARTING THE
ENGINE.
01_15
Manual starter control (01_15)
The carburettor starter control
«2»
is on the right side of the carburettor so it is easily
reached with the hand on the same side. It has two positions:
- Lever upwards: Starting in cold conditions.
- Lever downwards: Starting in normal conditions.
CAUTION
THE ONLY AIM OF THIS CONTROL IS TO MAKE STARTING EASIER. ONLY USE
IT WHEN THE ENGINE IS COLD.
14
1 Vehicle
Summary of Contents for RCR 50
