Gilera Fuoco 500ie, Manual

Page: 16 / 96

01_10
Horn button (01_10)
Push the button « E » to sound the horn.
01_11
Light switch (01_11)
When the light switch « H » is set to « 0 », the low-beam light is on. When set to « 1 »,
the high-beam light is activated. If the light switch « H » is pressed when set to « 2 », the
high-beam light is activated. The switch goes back to « 0 » automatically.
When the ignition key is set to « ON » and the vehicle is not running, only the tail light
is on.
When the ignition key is set to « ON » and the vehicle is running, the low-beam lights
will turn on two seconds after the ignition; when the high-beam lights turn on, the low-
beam lights turn off.
01_12
Emergency flashing light button (01_12)
It enables the activation of the 4 turn indicators simultaneously. The control « D » can
be enabled only with the key set to « ON », but once enabled, it keeps functioning even
if the key is set to « OFF » or « LOCK ». To disable this function, simply turn the key
switch to « ON ».
16
1 Vehicle