Br-EFB Dimensions & Mounting
The Br-EFB can easily be mounted in one of several ways:
1) Most GilderGear can easily be mounted in 2-
¾
”
. This includes
the Br-EFB.
2) A pair of
can be snapped onto the back of the Br-EFB. Once
snapped into place, you’ll have a devil of a time getting them off again.
They allow the Br-EFB to attach to standard DIN rail.
3) There are two 10-32 threaded holes for mounting the Br-EFB to a panel
from the back. They are on 4.50” centers. You can also use two 6-32
screws through the same holes in the Br-EFB from the front to hold it to a
panel.
4) It is not uncommon to simply attach self-adhesive Velcro to the back of an
Br-EFB and stick it to your control panel.
4.50"
Gnd
-10v
Pos FB
Error
Compl
+10v
+24v
Valve -
Valve+
Gnd
Battery -
B
Enable
External
Output
Low)
Error/ (Active
+24v
Gnd
-10v
Pos FB
Error
Compl
+10v
+24v
Valve -
Valve+
Gnd
-10v
Pos FB
Error
Error
Compl
+10v
+24v
Valve -
Valve+
Gnd
-10v
Pos FB
Heart
2.1mm
24 vdc
Power
Input
Input
Compl
+10v
+24v
Valve -
Valve+
A B
Br-EFB
Gilderfluke & Co. • Burbank, California
Axis
Axis
1
3
0
2
Axis
Axis
Rs-422
DMX-512
In
'thru'
In
'thru'
100
Activity
10/100
Ethernet
1.25"
2.75"
5.50"
'mini'
USB
Mi
cro
Sd Card
10/100
Ethernet
Thru
In
Thru
In
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-EFB Manual / May 22, 2018 3:28 PM / page 139 of 142
