Appendix: Procedure to Change POSIFLEX Monitor (LM-3110E) Resolution Setting
Page 16
MDE-3839Q Passport™ System Installation Addendum · December 2020
Appendix: Procedure to Change POSIFLEX Monitor
(LM-3110E) Resolution Setting
To change the resolution setting, proceed as follows:
1
Connect the power cable and power up the monitor. From the Control Panel, navigate to the
Display
tab (see
).
Figure 1: Connecting Power Cable and Navigating to Display Tab
2
Select
Change display settings
(see
).
Figure 2: Selecting Change Display Settings
