Before You Begin
Page 6
MDE-5440B Heater/Fan Kit (M14702K00X) Installation Guide for Encore® 900 Units · October 2021
Before You Begin
A properly grounded Electrostatic Discharge (ESD) wrist strap must be worn
while servicing any electronic devices or components. Failure to use
electrostatic precautions may damage electronic components and void
warranty.
CAUTION
To prepare the site and dispenser for the upgrade, proceed as follows:
1
Inform the manager.
2
Barricade the unit to be worked on.
3
Remove power to the unit at the breaker panel. Follow OSHA lockout/tagout procedures.
4
Read all the safety information provided in
MDE-5356 Encore and Eclipse Start-up/Service
Manual
.
5
Failure to turn off the unit during the kit installation may cause injury or bodily harm from
electrical shock. Ensure that all power to the unit is switched off before opening the door
to the unit and during installation.
WARNING
Isolate the two-wire connection to the unit.
