MDE-3642A Mechanical Totalizer Kits K35489, K35490, K94580 for The Advantage
®
Series • April 2003
Page 1
Purpose
This document provides instructions for installing mechanical totalizers in The Advantage
Series units manufactured without mechanical totalizers. Order one kit per product intake
meter.
Related Documents
MDE-2531
Pump and Dispenser Start-Up and Service
PT-1728
The Advantage Series Illustrated Parts Manual
Required Tools
• drift pin
• hammer
• lithium grease
• pliers
• socket set, U.S.
Parts List
Read All Related Documentation
Reviewing all related procedures before you begin work is important. Read and understand all
related manuals thoroughly. If you do not understand a procedure, call 1-800-743-7501 for
Gilbarco Tele-Support.
Read NFPA 30A and NFPA 70
Before servicing equipment, read and understand applicable information in the following
codes:
• The National Electric Code (NFPA 70)
• The Automotive and Marine Service Code (NFPA 30A)
• Any national, state and local codes that may apply.
Failure to service equipment in accordance with NFPA 30A and NFPA 70 may adversely
effect the safe use and operation of the system.
Kit Number
Unit of Measure
K35489
U.S. gallons
K35490
liters
K94580
Imperial gallons
Part Number
Description
Qty
T18464-G2
Assembly, cover plate and totalizer gears (U.S. gallon)
1 (K35489 kit only)
T18464-G3
Assembly, cover plate and totalizer gears (metric)
1 (K35490 kit only)
T18464-G4
Assembly, cover plate and totalizer gears (Imperial gallon)
1 (K94580 kit only)
N20965-12
Gear, counter
1
K77558-28
Cotter hair pin
1
A0000265
MDE-3642A
Mechanical Totalizer Kits
K35489, K35490, K94580 for
The Advantage
®
Series
Installation
