G
IL
BT
–
LED displays manufacturer
www.gilbt.com
In the menu under posi
tion “Pulsation” is an option to do a little bit more about this
effect.
There are three options to choose; set the pulsation programmed by user in LPD,
switch to constant pulsation applied to all displayed content, disable pulsation at all.
Select preferred setting and accept it.
g. temperature adjustment
Device has a built-in sensor that allows you to display current temperature on the
screen ( more details about this option in LPD user manual).
Because of constantly changing weather conditions there could be a difference between
displayed temperature and current one. In order to prevent this from happening device
has an option of sensor calibration.
If you attend to correct the displayed temperature, go to “Temperature adj.” in the menu.
Set the current temperature by using up and down buttons and accept it.
Hint!
Before temperature calibration always leave device for a couple of minutes turned on.
Temperature inside of unit might be slightly different when screen is warmed up.
3. Warranty terms and conditions
All products of Gil Brother Technology company are subject to 24 months warranty. The
term of warranty can be extended up to 36 moths (max.) with additional payment (ask
for more details at local dealer)
During warranty period all defects will be eliminated on the manufacturer cost. All these
at the local service point authorized by GilBT. Cost of delivery to the work shop have to
covered by user. Cost of delivery back to the user will be covered by entity engaged
in the repair. Warranty period automatically will be extended for the time that the unit is
being repaired.
Warranty repairs will be executed only with a valid proof of purchase.
