Intermec CN3 Handheld Information
2
Set Date/Time/Time Zone
1) Tap the Start button in the system tray.
2) Select “Settings”, then “Clock and Alarms”.
3) Home – Select Central Standard time to set time zone.
4) Set the current date, time.
5) OK or Exit from x at the top right of the screen to save and close the screen.
Set Backlight Power
1) Tap the Start button in the system tray.
2) Select “Settings”, then “System”, then Backlight.
3) Battery Power – Turn off if not used for 3 minutes (user option).
Dim if not used for 15 sec (user option)
Turn on if button press or screen tap.
4) External Power - Turn off if not used for 10 minutes (user option).
No Dimming
Turn on if button press or screen tap.
Check Power Settings
1) Start | Settings | System
2) Tap the Power icon – power settings display
Turn on ScanWedge
1) The ScanWedge Utility is active by default.
Configure CN3 Bluetooth:
1)
Start | Settings | Connections | Bluetooth | Mode
2)
Check “turn Bluetooth on”
3)
Select “devices” tab
4)
Select “add new device”
5)
Search should find the available devices
6)
Select the device you want
7)
Select “next”
8)
Enter the appropriate passcode for the device, typically “0000”
9)
Select “next”
10)
For services, check “serial” box
11)
Message may say “device added”, Save
12)
Select “com ports”
13)
Select “new outgoing port”…….. The device you wish to connect to will display
14)
Select ‘next”
15)
Select com port wanted
(may be com port 4)
16)
UNCHECK
secure communications
17)
Save and exit
