ASSEMBLY INSTRUCTIONS
Frame Parts
x14
Fiberglass Poles
Stakes
Step 1- TENT SET UP
To prolong the life of your tent floor we suggest using a ground cloth cut slightly smaller than the floor of your tent and that you select
a clean level area for your campsite.
1) Spread the ground tarp on desired location.
2) Spread the tent body out on top of the ground tarp. Be sure the tent is properly centered on tarp.
3) Fully open all of the poles.
4) Carefully thread the Tent Poles through the pole sleeves that cross over the top of the roof of tent (Figure A).
5) Insert all the pole ends into the pins at the bottom corners of tent (Figure A).
6) Stake the tent down (Figure B).
7) Attach all of the pole clips to tent poles (Figure C).
8) Tie the top of the tent to the poles (Figure D).
TENT SET UP DIAGRAM
Tent Poles (x2)
Fly Poles (x2)
