Gigaset SL780 Manual Download Page 55

Page: 55 / 91

ECO DECT

Gigaset SL780/SL785 / AUS Neuseeland / A31008-M2009-C401-3-7619 / registr_sett.fm / 29.11.2010

rsion 4, 16.0

.2005

ECO DECT

You are helping to protect the environment
with your Gigaset SL780/SL785.

Reduced energy consumption

Your telephone has a power-saving adapter
plug and uses less power.

Reducing radiation

The radiation from your telephone is
reduced

automatically

The closer the handset is to the base, the
lower the radiation.

You can reduce the radiation from the hand-
set and base even more by using

Eco Mode

Reduces the radiation of the base station
and handset by 80% - whether you are
making a call or not.

Eco Mode

reduces

the range of the base station by approx.
50%. Using

Eco Mode

always makes

sense when a reduced range is sufficient.

Switching off radiation

Eco Mode+

When you activate

Eco Mode+

the radia-

tion of base and handset is switched off
automatically and only turns on when
calls are made.
This is also true when multiple handsets
are used, if the handsets support

Eco

Mode+

Eco Mode / Eco Mode+

can be activated/

deactivated independently of one another
and can also be used with multiple handsets.

Activate/deactivate Eco Mode / Eco
Mode+:

Settings

System

Eco Mode

Eco Mode+

§Change§

Press the display key (

= on).

Status displays

Display icon

Ð i Ñ Ò

Reception strength:

– good to poor
– no reception

white

Eco Mode

deactivated

green

Eco Mode

enabled

white

Eco Mode+

enabled

(displays instead of the
reception strength icon
when in idle status)

green

Eco Mode

and

Eco

Mode+

activated

Please note

When using

Eco Mode+

you can

ensure that the range of the base is
sufficient by pressing and

holding

the

talk key

. You hear the dial tone if

the base can be reached.

When

Eco Mode+

is enabled:

– call setup is delayed by approx.

2 seconds.

– handset standby time is reduced

by approx. 50%.

Registering handsets that do not sup-
port

Eco Mode+

causes the mode to

be deactivated on the base and all
other handsets.

Activating

Eco Mode

reduces the

range of the base.

Eco Mode / Eco Mode+

and repeater

support (

page 69) cancel each

other out, i.e. if you use a repeater you
cannot use

Eco Mode

and

Eco

Mode+

Summary of Contents for SL780




























































































Search results

Summary of Contents for SL780

Reviews:

Related manuals for SL780

Brands by name

Popular brands

Gigaset SL780, Manual

Search results

Summary of Contents for SL780

Reviews:

Related manuals for SL780

Brands by name

Popular brands