Gigaset SL780 Manual Download Page 74 | Manualshive

Page: 74 / 91

Gigaset SL780 Manual Download Page 74

72

Customer service & product warranty – Australia and New Zealand

Gigaset SL780/SL785 / AUS Neuseeland / A31008-M2009-C401-3-7619 / appendix.fm / 29.11.2010

V

e

rsion 4, 16.0

9

.2005

Customer service & product warranty – Australia and
New Zealand

IMPORTANT

Please retain your sales receipt as proof of the date of purchase.

Customer Service

If you require assistance in operating this product please contact us

AUS: 1300 780 878 or by e-mail at the Customer Care section of our website at

www.gigaset.com/au

NZ: 0800 780 878 or by e-mail at the Customer Care section of our website at

www.gigaset.com/au

If you are trying to access a Network Service and require assistance specifically related to the
network service or would like to subscribe to the service, contact your service provider.

Product Warranty

Subject to the conditions below, this product, excluding battery and accessory devices, is guar-
anteed against any defect in materials or workmanship under conditions of normal use for a
period of 12 months from date of purchase.

The benefits conferred by this warranty are in addition to other warranties and remedies that
are implied under the Australian Trade Practices Act and similar Country, State and Territory
laws (Statutory Rights).

Subject to your Statutory Rights, the goods will not be eligible for service under this warranty if:

1. Proof of purchase cannot be provided;

2. The defect was caused by an accident, misuse, abuse, improper installation or operation, ver-

min infestation, lack of reasonable care, unauthorised modification, loss of parts, tampering
or attempted repair by a person not authorised by Gigaset; or

3. The product has been damaged by lightning or a mains power surge.
4. The Phone was not imported into Australia by Gigaset Communications GmbH.

To obtain service during the terms of this warranty call the Information Line on

AUS: 1300 780 878 or by e-mail at the Customer Care section of our website at

www.gigaset.com/au

NZ: 0800 780 878

If it is necessary to have the product serviced, the Customer Service Representative will inform
you of the product return process.

«
...
72
73
74
75
76
...
»

Summary of Contents for SL780




























































































Reviews:

No comments