Gigaset SL450A GO User Manual Download Page 124

Page: 124 / 148

124

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

Questions and answers

Gigaset SL450A GO / LUG IE-UK en / A31008-M2721-L101-1-7619 / FAQs.fm / 7/16/15

Appendix

Questions and answers

Possible solutions are available online at

www.gigaset.com/faq

Troubleshooting

The phone is not ready for use after initial set-up.

•

The one-off initialisation phase may take up to 10 minutes.

The display is blank.

•

The handset is not activated.

Press and

hold

•

The battery is empty.

Charge the battery or replace it

"No Base" flashes on the display.

•

The handset is outside the range of the base station.

Move the handset closer to the base

station

•

The base is not activated.

Check the base station power adapter

•

The base station's range is reduced because

Maximum Range

is deactivated.

Activate

Maximum Range

or reduce the distance between the handset and base station

"Please register handset" flashes on the display.

•

The handset has not yet been registered or was de-registered due to the registration of an
additional handset (more than 6 DECT registrations).

Re-register the handset

Your settings are not accepted.

•

The wrong profile has been set. Set

Profile Personal

. . . then make changes to the device

settings.

The handset does not ring.

•

The ringtone is deactivated.

Activate ringtone

•

Call forwarding is set.

Deactivate call forwarding

•

The phone does not ring if the caller has withheld his number.

Activate the ringtone for anonymous calls.

•

The phone does not ring during a specific period or for certain numbers.

Check the time control for external calls

No ringtone/dial tone from the fixed line network.

•

Incorrect phone cable.

Please always use the phone cable supplied or ensure that the pin

connections are correct when purchasing from a retailer.

The connection always terminates after approx. 30 seconds.

•

A repeater (earlier than Version 2.0) has been activated or deactivated.

Switch the handset

off and back on again.

Error tone sounds after system PIN prompt.

•

You have entered the wrong system PIN.

Repeat the process, reset the system PIN to 0000

if required

Summary of Contents for SL450A GO





















































































































































Search results

Summary of Contents for SL450A GO

Reviews:

Related manuals for SL450A GO

Brands by name

Popular brands

Gigaset SL450A GO, User Manual

Search results

Summary of Contents for SL450A GO

Reviews:

Related manuals for SL450A GO

Brands by name

Popular brands