61
Using a handset as a room monitor
Gigaset SL400/400 A / IM-MEA EN / A31008-M2103-A601-2-UZ19 / registr_sett.fm / 10.11.2010
V
e
rsion 4, 16.0
9
.2005
In idle status, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select noise level sensitivity (
Low
or
High
).
¤
Press
§Save§
to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
Changing the set destination
number
v
¢
É
¢
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
(
Cancelling/deactivating the room
monitor
Press the end call key
a
to cancel the call
when the
room monitor is activated
.
In idle status
, press the display key
§Off§
to
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites
: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys
9
;
.
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor set-
tings on the handset (e.g., no ringtone) will
remain activated until you press the display
key
§Off§
on the handset.
To reactivate the room function with the
same phone number:
¤
Reactivate and save with
§Save§
¢
Warning!
u
Always check the operation of the
room monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the charger. This ensures
that the battery does not run down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
i Ã
V
07:15
INT 1
05 Apr
Á
Room monitor
0891234567
Off
Options
